The Quadra-Fire MT Vernon is classic cast iron design stove. The MT Vernon stove has comfort-quite blowers to reduce the noise levels while the stove is operating. Quadra-Fire states the pellet stove can burn a variety of wood pellets of various grades. The stove can adjust the necessary settings the get the best burn possible from your chosen fuel. The stove hopper can hold 81 lbs of pellets, and has an overall efficiency of around 82%.

Stove Heat Output:

14,620 – 60,200 BTU’s

Heating Capacity up to 3,800 sq.ft

Biomass Pellet Choice:

Quadra fire state the stove can burn a wide variety of wood pellets and other types of fuel. Contact Quadra fire for more specific information stove maximum ash content etc.

Stove Maintenance and Efficiency Features:

Airfoil heat exchanger

Firepot auto clean system

Automatic lighting and operation programs for different fuels

6 foot 12-volt power cord (for power outage)

The PelHeat Mobile Pelletizer can upgrade various biomass resources including wood into pellets. If you would like to register your interest in the PelHeat Mobile Pelletizer please contact us at:

Contact @ PelHeat . com

Thank you for your interest

www.pelheat.com

The Harman P61 Wood Pellet Stove automatically adjusts itself to your desired room temperature. Simply pour your wood pellets into the convenient top-loading hopper and set the temperature. The Harman P61 can hold up to 72 lbs of pellets.

Harman Stove Heat Output:

Up to 61,00 BTU’s

Heating capacity up to 2,000 sq.ft

Harman Biomass Pellet Choice:

The Harman P61 stove like the other Harman stoves I’ve covered on the blog uses Harman’s patented feeder and burn pot. This gives the stove a better chance of working with a wider variety of biomass pellets. The P61 stove also features an Exhaust Sensing Probe (ESP) to adjust feed rate and increase efficiency. With 61,000 BTU’s of heat output the stove can heat quite a large area. The P61 also features a large ash pan optional battery back system.

Harman Maintenance and Efficiency Features:

Large Ash Pan

Accordian Heat Exchanger

Harman Patented Feed and Burn Pot

Stove ESP Control

Harman Super Easy Stove Cleaning

The PelHeat Mobile Pelletizer can upgrade various biomass resources including wood into pellets. If you would like to register your interest in the PelHeat Mobile Pelletizer please contact us at:

Contact @ PelHeat . com

Thank you for your interest

www.pelheat.com

The Harman Advance stove has been designed to be ‘The Ultimate in Home Heating Convenience’. The Advance uses a small sensor to send information back to the stove to keep a constant room temperature. The Advance stove is based on a clean simple design, with a top feed hopper and a glass hopper door to check hopper level easily. The Advance stove can hold up to 60 lbs of pellets, and is available as a pellet fire insert. And has a stove battery backup option for power cuts.

Harman Stove Heat Output:

Up to 48,00 BTU’s

Heating capacity up to 1,500 sq.ft

Biomass Pellet Choice:

The Harman Advance like the other Harman stoves I’ve covered on the blog uses Harman’s patented feeder and burn pot. This gives the Harman stove a better chance of working with a wider variety of biomass pellets. Harman state in the specification for the stove that the fuel is ‘Bio-Mass Pellets’. The Harman stoves in the Cornell trials have preformed well on grass pellets.

To maintain a constant temperature the Harman Advance uses a sensing probe to send information to the stove microprocessor. This information is used to determine the pellet feed rate to maintain a constant temperature. This enables the stove to maintain a constant temperature, and could help when burning different biomass pellets, as feed rates do need to be changed. Many pellet stoves and boilers use a thermostat to start and stop pellet feeding. Therefore the temperature of the stove may have an average of say 70 degrees, but the temperature will vary between 65-75 degrees.

Harman Maintenance and Efficiency Features:

Oversize Ash Pan

Accordian Heat Exchanger

Harman Patented Feed and Burn Pot

Easy Top Loading Design

The PelHeat Mobile Pelletizer can upgrade various biomass resources including wood into pellets to be used in a gasifier. If you would like to register your interest in the PelHeat Mobile Pelletizer please contact us at:

Contact @ PelHeat . com

Thank you for your interest

www.pelheat.com

The Harman Accentra Pellet Stove is a traditional cast iron design pellet stove with state of the art features. The Accentra stove operates in the same way as the Harman P68 stove, it monitors room temperature to feed the amount of pellets required to maintain at that temperature. The Accentra has many of the same features as the P68, in a smaller profile and heat output. The Accentra can hold up to 50 lbs of pellets, and is available as a pellet fire insert.

Stove Heat Output:

Up to 40,00 BTU’s

Heating capacity up to 1,450 sq.ft

Biomass Pellet Choice:

The Harman Accentra like the other Harman stoves I’ve covered on the blog uses Harman’s patented feeder and burn pot. This gives the stove a better chance of working with a wide variety of biomass pellets. Harman state in the specification for the stove that the fuel is ‘Bio-Mass Pellets’. The Harman stoves in the Cornell trials have preformed well on grass pellets.

Instead of using a thermostat the Accentra uses a sensing probe to send information to the stoves microprocessor. This information is used to determine the pellet feed rate to maintain a constant temperature. This enables the stove to maintain a constant temperature, and could help when burning different biomass pellets, as feed rates do need to be changed. Many pellet stoves and boilers use a thermostat to start and stop pellet feeding. Therefore the temperature of the stove may have an average of say 70 degrees, but the temperature will vary between 65-75 degrees. Finally the Accentra has an exhaust temperature sensor, this greatly increases efficiency because it stops excessive heat being wasted up the chimney. Our Tatano boiler also has an exhaust temperature sensor.

Maintenance and Efficiency Features:

Large Ash Pan

Cast Iron Feeder

ESP Control (Exhaust Sensor)

Cast Iron Heat Exchanger

Quite Operation

If you would like to register your interest in the PelHeat Mobile Pelletizer please contact us at:

Contact @ PelHeat . com

Thank you for your interest

www.pelheat.com

The Quadra-Fire Classic Bay 1200 stove has three different feed rate settings and an adjustable convection blower. The burn pot in the Classic Bay 1200 stove reaches 2000 degrees with its cyclone design. This reduces the emissions from the stove to an average of less than 1 gram per hour. The unit features a large ash draw and large hopper to hold 80 pounds of pellets. Which can provide fuel for up to 40 hours of continuous operation.

Stove Heat Output:

15,000 – 40,000 BTU’s

Heating Capacity up to 2,500 sq.ft

Biomass Pellet Choice:

Quadra fire do not provide much information on the stove burn pot design and layout, therefore the possibility of using high ash and clinker fuels is unknown. However on the corrosion and maintenance side, the aluminium heat exchanger tubes are a plus, and the EZ clean fire pot and ash cleanout. I would probably think the stove is really only suitable for premium wood pellets though, as the fake logs could cause some issues when burning other type of biomass pellet. However the description for the Classic Bay 1200 states the log set is optional.

Stove Maintenance and Efficiency Features:

Self Lighting and Fully Automatic

EZ Clean Firepot & Firebox Ash Cleanout

Aluminium Heat Exchanger

Self Lighting & Fully Automatic

Stove Thermostat Control

Jam Proof Feed System

If you would like to register your interest in the PelHeat Mobile Pelletizer please contact us at:

Contact @ PelHeat . com

Thank you for your interest

www.pelheat.com

The Harman Pellet Pro 38 Plus is a compact stove that can be positioned in tight spaces, and is available in many different colours and door styles. The stove produces up to 38,000 BTU’s under normal operation, and with Turbo mode can produce an additional 5,000 BTU’s. The hopper on the stove holds 50 lbs of pellets, with an optional hopper extension to hold 100bs of pellets.

Stove Heat Output:

Up to 38,000 BTU’s, plus an extra 5,000 BTU’s on demand

Heating capacity up to 1,400 sq.ft

Stove Biomass Pellet Choice:

The Harman Pellet Pro 38 Plus Stove like the other Harman stoves I’ve covered on the blog uses Harman’s patented feeder and burn pot. This gives the stove a better chance of working with a wide variety of biomass pellets. Harman stoves in the Cornell trials have preformed well on grass pellets.

Stove Maintenance and Efficiency Features:

Battery Backup option

Supersized Ash Pan

Patented Pellet Pro Feeder

Patented Pellet Pro Burn Pot

Accordion Heat Exchanger

Stove Turbo Mode

If you would like to register your interest in the PelHeat Mobile Pelletizer please contact us at:

Contact @ PelHeat . com

Thank you for your interest

www.pelheat.com